   BROCADE-VCS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE,
       Integer32, Gauge32,
       Counter32, Unsigned32              FROM SNMPv2-SMI
       MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
       TruthValue, TEXTUAL-CONVENTION,
       DisplayString                      FROM SNMPv2-TC
       InetAddress, InetAddressType       FROM INET-ADDRESS-MIB
       FcWwn                              FROM Brocade-TC
       bcsiModules                        FROM Brocade-REG-MIB;

   brocadeVcsMIB MODULE-IDENTITY
       LAST-UPDATED "201504080000Z"
       ORGANIZATION
              "Brocade Communications Systems Inc."
       CONTACT-INFO
              "130 Holger Way,
               San Jose, CA
               95134 USA.

               Phone: +1-408-333-8000
               Email: vivekk@brocade.com"
       DESCRIPTION
              "The MIB module for the monitoring of VCS fabrics. VCS 
               fabrics is a proprietary technology of Brocade.

               A VCS fabric consists of a set of inter-connected 
               Brocade VDX switches. These set of switches together
               behave like a single L2 switch to the outside world.
               The cluster can operate in 2 modes: fabric mode and 
               Logical chassis mode.
               In fabric mode, the switches together behave like a 
               single L2 switch - but configuration on each switch
               is independent of the other.
               In logical chassis mode, one switch in the fabric is 
               elected as the principal switch. All configurations 
               need to be done only from the principal switch.
               This is synced across to all the switches in the fabric.
               Thus the configuration information is the same on all 
               the switches." 

       REVISION      "201504080000Z"
       DESCRIPTION
              "Initial version."
       ::= { bcsiModules  6 }

   brocadeVcsMIBObjects     OBJECT IDENTIFIER ::= { brocadeVcsMIB 1 }
   brocadeVcsMIBConformance OBJECT IDENTIFIER ::= { brocadeVcsMIB 2 }

   VcsConfigMode ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION
              "The configuration mode that is in effect in the VCS 
               fabric.
               local(1) - configuration is local to the switch.
               distributed(2) - configuration is to be done from the 
                                principal switch and will be the same
                                across all the switches in the fabric."
       SYNTAX INTEGER {
                local(1),
                distributed(2)
       }

   VcsOperationMode ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION
              "The operational mode of the fabric.
               fabricCluster(1) - the entire set of switches in the 
                                  cluster behaves like a single L2 
                                  switch to the outer world. However,
                                  configuration is local to each switch.
               logicalChassis(2) - in this case the fabric behaves 
                                   like a single L2 switch and the 
                                   configuration is driven from the
                                   principal switch and is the same 
                                   across all switches in the fabric." 
       SYNTAX INTEGER {
                fabricCluster(1),
                logicalChassis(2)
       }

   VcsIdentifier ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION
              "A number that uniquely identifies a fabric. Two different 
               fabrics would have different identifiers."
       SYNTAX Unsigned32 (1 .. 8192)

   VcsRbridgeId ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION
              "A number that uniquely identifies a switch within a fabric."
       SYNTAX Unsigned32 (1 .. 239)

   VcsClusterCondition ::= TEXTUAL-CONVENTION
       STATUS     current
       DESCRIPTION
              "The state of the fabric as a whole.
               good(1) - indicates that all switches are in good 
                         condition and cluster is fine.
               degraded(2) - indicates that one or more switches are 
                             offline and cluster has degraded.
               error(3) - Internal error state."
       SYNTAX INTEGER {
               good(1),
               degraded(2),
               error(3)
       }

   vcsConfigMode OBJECT-TYPE
       SYNTAX     VcsConfigMode
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
	      "The configuration mode of this cluster that is in effect."
   ::=  { brocadeVcsMIBObjects 1 }

   vcsModeOfOperation OBJECT-TYPE
       SYNTAX     VcsOperationMode
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The operational mode of this cluster."
   ::= { brocadeVcsMIBObjects 2 }

   vcsIdentifier OBJECT-TYPE
       SYNTAX     VcsIdentifier
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The unique identifier of this cluster."
   ::= { brocadeVcsMIBObjects 3 }

   vcsVirtualIpV4Address  OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The virtual IPv4 address of the cluster. Management 
               stations can use this address to send requests."
   ::= { brocadeVcsMIBObjects 4 }

   vcsVirtualIpV6Address OBJECT-TYPE
       SYNTAX     InetAddress
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The virtual IPv6 address of the cluster. Management 
               stations can use this address to send requests."
   ::= { brocadeVcsMIBObjects 5 }

   vcsVirtualIpAssociatedRbridgeId OBJECT-TYPE
       SYNTAX     VcsRbridgeId
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The rbridge-id of the switch that hosts the virtual IP 
               address."
   ::= { brocadeVcsMIBObjects 6 }

   vcsVirtualIpInterfaceId OBJECT-TYPE
       SYNTAX     Unsigned32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The interface Id that is configured in the case of 
               inband configuration. If it is not inband configuration,
               then this object will contain the value 0."
   ::= { brocadeVcsMIBObjects 7 }

   vcsVirtualIpV4OperStatus OBJECT-TYPE
       SYNTAX     INTEGER {
                     up(1),
                     down(2)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The operational status of the virtual IPv4 address."
   ::= { brocadeVcsMIBObjects 8 }

   vcsVirtualIpV6OperStatus OBJECT-TYPE
       SYNTAX     INTEGER {
	             up(1),
                     down(2)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The operational status of the virtual IPv6 address."
   ::= { brocadeVcsMIBObjects 9 }

   vcsNumNodesInCluster OBJECT-TYPE
       SYNTAX     Unsigned32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The number of switches in the cluster that are currently 
               online."
   ::= { brocadeVcsMIBObjects 10 }

   vcsClusterCondition OBJECT-TYPE
       SYNTAX         VcsClusterCondition
       MAX-ACCESS     read-only
       STATUS         current
       DESCRIPTION
              "The condition of the cluster as a whole."
   ::= { brocadeVcsMIBObjects 11 }

   vcsFabricIslTable  OBJECT-TYPE
      SYNTAX     SEQUENCE OF VcsFabricIslEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
             "This table contains all the ISLs (Inter Switch Link) on 
              the local device." 

   ::= { brocadeVcsMIBObjects 12 }

   vcsFabricIslEntry OBJECT-TYPE
      SYNTAX     VcsFabricIslEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
             "Represents a single Inter Switch Link (ISL) on this 
              switch."
	  INDEX { vcsFabricIslIndex }
   ::= { vcsFabricIslTable 1 }
  
   VcsFabricIslEntry ::= SEQUENCE {
      vcsFabricIslIndex           Unsigned32,
      vcsFabricIslIntfName        DisplayString,
      vcsFabricIslNbrIntfName     DisplayString,
      vcsFabricIslNbrWWN          FcWwn,
      vcsFabricIslNbrName         DisplayString,
      vcsFabricIslBW              Unsigned32,
      vcsFabricIslIsTrunk         TruthValue 
   }
    
   vcsFabricIslIndex OBJECT-TYPE
       SYNTAX     Unsigned32 
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
              "A unique id to distinguish this ISL from others on the 
               local device."
       ::= { vcsFabricIslEntry 1 }

   vcsFabricIslIntfName OBJECT-TYPE
       SYNTAX     DisplayString 
       MAX-ACCESS read-only 
       STATUS     current
       DESCRIPTION
              "The interface name (ifName) of the interface on which 
               the ISL is formed on this switch."
       ::= { vcsFabricIslEntry 2 }

   vcsFabricIslNbrIntfName OBJECT-TYPE
       SYNTAX     DisplayString 
       MAX-ACCESS read-only 
       STATUS     current
       DESCRIPTION
	      "The interface name (ifName) of the interface on the 
               neighboring switch for this ISL."
       ::= { vcsFabricIslEntry 3 }

   vcsFabricIslNbrWWN OBJECT-TYPE
       SYNTAX     FcWwn 
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The World Wide Name (WWN) of the neighboring switch 
               for this ISL."
       ::= { vcsFabricIslEntry 4 }

   vcsFabricIslNbrName  OBJECT-TYPE
       SYNTAX     DisplayString
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The name of the neighboring switch on which this ISL 
               is formed."
       ::= { vcsFabricIslEntry 5 }

   vcsFabricIslBW  OBJECT-TYPE
       SYNTAX     Unsigned32
       UNITS      "megabytes"
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "The band-width of this ISL."
       ::= { vcsFabricIslEntry 6 }

   vcsFabricIslIsTrunk  OBJECT-TYPE
       SYNTAX     TruthValue 
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
              "An indication whether this ISL is a trunk interface.
               A value of true(1) means it is a trunk.
               A value of false(2) means it is not a trunk."
       ::= { vcsFabricIslEntry 7 }

   --  Conformance information

   brocadeVcsConformanceGroups
        OBJECT IDENTIFIER ::= { brocadeVcsMIBConformance 1 }

   brocadeVcsCompliances
        OBJECT IDENTIFIER ::= { brocadeVcsMIBConformance 2 }

   --  Compliance statements

   brocadeVcsCompliance MODULE-COMPLIANCE
      STATUS     current
      DESCRIPTION
             "The compliance information for this MIB."
      MODULE -- this module
      MANDATORY-GROUPS { brocadeVcsObjectGroup }

      ::= { brocadeVcsCompliances 1 }

   -- units of conformance

   brocadeVcsObjectsGroup OBJECT-GROUP
       OBJECTS { vcsConfigMode,
                 vcsModeOfOperation,
                 vcsIdentifier,
                 vcsVirtualIpV4Address,
                 vcsVirtualIpV6Address,
                 vcsVirtualIpAssociatedRbridgeId,
                 vcsVirtualIpInterfaceId,
                 vcsVirtualIpV4OperStatus,
                 vcsVirtualIpV6OperStatus,
                 vcsNumNodesInCluster,
                 vcsClusterCondition,
                 vcsFabricIslIndex,
                 vcsFabricIslIntfName,
                 vcsFabricIslNbrIntfName, 
                 vcsFabricIslNbrWWN, 
                 vcsFabricIslNbrName, 
                 vcsFabricIslBW, 
                 vcsFabricIslIsTrunk
           }
       STATUS     current
       DESCRIPTION
              "The MIB objects related  to VCS monitoring."
       ::= { brocadeVcsConformanceGroups 1 }

   END
